Skip to main content

Polyurethane Parts for the Snow Removal Industry

image

FallLine manufactures polyurethane snow removal parts for industrial operators who clear streets, parking lots, driveways, runways and walkways every winter. Our line covers snow plow cutting edges, plow wings, skid shoes, bucket cutting edges, ATV and UTV plow edges, spinners and custom-manufactured parts, all cast from polyurethane instead of rubber, steel or plastic.

We started making polyurethane snowplow edges in the early 1990s and have served the snow removal industry for more than 30 years. Contractors, municipal fleets, airport operators, equipment dealers and OEMs across North America run our parts because they last longer, protect the surfaces underneath and keep working in deep cold. Our polyurethane cutting edges are proudly made in the U.S.A.

white snowplow truck with polyurethane cutting edges

Who Uses FallLine Polyurethane Snow Removal Parts

airport snow plow fitted with polyurethane cutting edge

Each type of snow removal operation puts different demands on its equipment. Polyurethane answers most of them with one material.

  • Commercial contractors: quieter edges for residential routes, hospitals and early-morning lot clearing, with less vibration reaching the operator.
  • Municipal and DOT fleets: custom edges sized for large truck plows, box plows and snow pushers, plus bucket edges for loaders.
  • Airport operators: polyurethane edges leave no metal shavings on the runway and are less likely to tear out embedded lighting.
  • Equipment dealers and distributors: stock sizes for common plows and a single source for custom lengths and profiles.
  • OEMs: polyurethane components cast to your drawing for integration into your own plows and attachments.
  • ATV and UTV owners: polyurethane plow edges built for compact plows on driveways, sidewalks and pavers.

View all polyurethane snow removal products by category.

The FallLine Polyurethane Snow Removal Product Line

Every product below is cast in polyurethane for snow and ice work. Use this overview to find the right category, then visit each page for sizes and specifications.

Snow Plow Cutting Edges and Blades

The cutting edge is the wear part on every snow plow blade, and it is where polyurethane makes the biggest difference. We stock blank polyurethane snow plow cutting edges in the most common sizes for pickup and compact plows. Buyers drill them with standard power tools, using the old edge as the template. Most edges can be flipped when one side wears, which doubles their working life:

  • ATV/UTV edges: Center drilled, so you can flip them when one side wears and double the working life.
  • 6" edges: Double punched, so you can lower the edge once as it wears. In some cases you can lower it and then flip it for extra life.
  • 8" edges: Triple punched, so you can lower the edge twice as it wears. Many can also be flipped afterward for even more life.

Plow Wings

Wing plow setups take hard side loads at every pass. Our polyurethane plow wings replace factory wings on select plow models and use a formulation built for abrasion resistance, tear resistance and high rebound. For other makes and models, our sales team can help.

Skid Shoes

Skid shoes set the blade height and ride on the pavement all season. FallLine makes solid polyurethane snow plow skid shoes, polyurethane-covered shoes and snow blower skid shoes. We also recover worn metal shoes with polyurethane, so you can restore existing hardware instead of replacing it.

Bucket Cutting Edges

Our polyurethane bucket cutting edges turn a loader or skid steer bucket into a surface-safe snow tool. Each edge is 2.5 inches thick with a 30-degree bevel and an encased steel plate for strength, in continuous lengths up to 95 inches. The 6-inch edge fits skid steers and light tractor loaders, and the 8-inch edge fits medium to large tractors and loaders. Bucket edges are built for snow and wet conditions, not down-pressure or dry work.

ATV and UTV Plow Components

Compact plows clear the places trucks cannot reach. Our ATV and UTV plow blades and cutting edges come in 48, 60 and 72 inch widths. A 4 inch by 0.75 inch edge suits most standard plows, and a 72 by 6 by 1 inch edge handles heavier setups.

Spinners

Polyurethane spinners replace worn stock metal spinners in open hub and closed hub styles. Sand and salt do not stick to the polyurethane surface, and the spinners will not rust.

Custom-Manufactured Snow Removal Parts

When a stock size will not fit, we make it. Custom polyurethane snow plow cutting edges come straight or beveled, blank or pre-drilled, 0.75 to 2.5 inches thick, 3 to 14 inches wide and up to 144 inches per piece. For components beyond edges, our custom polyurethane molding team casts parts to your specifications. We also carry polyurethane snow removal hand tools for crews working on foot.

Why Polyurethane Outperforms Rubber, Steel, UHMW and Carbide

Polyurethane combines abrasion resistance, tensile strength, tear resistance and rebound in one material. For snow removal, that adds up to four practical advantages.

  • Durability: polyurethane edges outlast rubber, mild steel, UHMW and lower-grade urethane edges, and most can be flipped for increased wear life.
  • Surface protection: polyurethane absorbs impact and flexes over raised obstacles, so it protects concrete, asphalt, brick, pavers, cobblestone and pavement markings. Polyurethane also doesn’t scratch, chip or leave rust marks.
  • Noise and vibration reduction: polyurethane runs quietly and dampens blade vibration, which cuts operator fatigue and wear on the plow and truck.
  • Cold-weather flexibility: our edges are engineered to perform down to -50°F and resist tearing and chunking, while the material holds up to chemicals, ozone, sunlight and harsh weather.

Polyurethane is the superior choice for effective snow removal in harsh conditions.

Learn more about Polyurethane

Polyurethane vs. Rubber

Rubber edges protect surfaces, but they give up wear life and scraping performance. Polyurethane offers the same non-metal surface protection with better abrasion resistance, a cleaner scrape and longer service life.

Polyurethane vs. Steel

Steel is rigid, loud and prone to rust. It scratches decorative concrete, chips pavers and catches on raised joints. A polyurethane edge flexes over those obstacles, will not rust or leave rust marks, and sends far less vibration into the cab. Additionally, polyurethane typically offers a longer service life compared to steel.

Polyurethane vs. UHMW Poly

UHMW polyethylene, often called poly, is slick and lightweight, and it often costs less up front. It lacks polyurethane's elasticity. Polyurethane rebounds after impact and resists abrasion better, so it lasts longer on uneven pavement, expansion joints and gravel transitions and delivers more value over the season.

Custom and OEM Polyurethane Components for Snow Removal Equipment

FallLine is a custom polyurethane manufacturer first. If you build plows, spreaders or attachments, or you need a part no catalog carries, send us a drawing, file or sample. Our in-house machine shop builds the mold, and we cast the part to your specification in hardness ranges from 40 Shore A to 80 Shore D. If a feature cannot be cast in polyurethane, we will flag it before production starts.

Request a Quote on Custom Polyurethane Snow Removal Parts

Stock cutting edges, plow wings, skid shoes and spinners are all in our full range of polyurethane snow removal parts. For custom edges and blades, OEM components or fleet-wide replacements, request a quote with your drawing or specs and our team will review your project.

FAQs About Polyurethane Snow Removal Parts

What snow removal parts does FallLine make from polyurethane?

FallLine makes polyurethane snow plow cutting edges, ATV and UTV plow edges, plow wings, skid shoes, bucket cutting edges, spinners and hand tools. We also manufacture custom edges and cast custom polyurethane components to customer specifications.

Is polyurethane better than steel for a snow plow cutting edge?

For most surfaces, yes. Polyurethane outlasts mild steel, will not rust, runs more quietly and flexes over raised obstacles instead of gouging concrete, pavers or pavement markings. It also reduces vibration, which lowers operator fatigue and equipment wear.

Do polyurethane cutting edges work in extreme cold?

Yes. FallLine polyurethane cutting edges are engineered to perform down to -50°F and resist tearing and chunking in cold conditions.

Can a polyurethane cutting edge be flipped?

Most FallLine polyurethane edges can be flipped once the first side wears, which doubles their wear life.

Can FallLine make custom polyurethane snow removal parts?

Yes. Custom cutting edges are available straight or beveled, 0.75 to 2.5 inches thick, 3 to 14 inches wide and up to 144 inches per piece. For other components, send a drawing, file or sample and we will quote the part.

Service when you need it

Have a question with an order, or looking for something custom?
We pride ourselves on superior, reliable customer service.